 |
Truvolt Engineering Co. Pvt. Ltd. is a well-established Power Transformer Manufacturer, Exporter and Supplier in Kolkata, West Bengal. We manufacture these Power Transformers as per the approved quality norms and ensure that they function perfectly. Our Power Transformers are durable in nature and have features that make it easy to work with them. Our Power Transformers can be obtained at reasonable prices.
Application
Exclusively Power transformer are used for transmit the power over a long distance by step up or clown The voltage level in medium and low voltage sub-station . Ln greed station power transformer is used as a generating transformer there by power can be Fed in bi-directional way. It takes power from plant uses, when no necessity the power is fed to the greed from generated itself.
Design Parameters
 High factor of safety
Robust design
Low power consumption
High mechanical strength to withstand the symmetrical fault
Efficient voltage regulation
Well power transfer capacity and efficiency |
Construction
Follow up the clearance with due respect of voltage class in accordance with IS-2026
Use of M.S core clamp with acid treatment, fine surface finishing and oil resistant painting
Use of strain less steel flitch plate core stud clamping rod by proper machining for obtaining the require dimensions
Use of M.S. Fabricated tank of every part fine surface finishing robust support with stiffeners with acid treatment and painted after sand blasting
Prime core of 0.27 mm thickness with 1.6 wblmz proper laminated core used at assembly stage and stiffen with poly glass tape by Iron pressed
Copper conductors & bar of 99.9 % Electrolytic grade copper with good conductivity used for making winding and insulated with paper insulating materials
& wooden
supports with well tested & high tensile strength good toughness
Brazing rod for copper bar connection of 42 % Rupatam is used
In tank type O.L.T.C or linier Flange type O.L.T.C is fitted for require amount of voltage out put
Permawood Ring for winding pressure, Wooden platform at Bottom side for uniform support
Wooden Bracket support on both primary & secondary side for connection Arrangement
Wooden bolts are used with wooden nut for proper joining
W.T.I C.T and N.C.T. on Both or either side with wooden bracket arrangement
After heating Adhesive used to avoid looseness
Pre-compressed board are used for making Cylinder, Ductstrip, Dove-tail support
Insulated core bolt with glass and M.S. Washer fitted with glass tube |
Range
Up to 36 Mva 132 KV |
|
|
| |
|
|
